Shalimar Paints General Purpose Synthetic Enamel

It is a general-purpose industrial synthetic enamel. This is designed essentially for on steel concrete and wooden substrates in normal industrial environment

Glossy

The high gloss effect of the product is the best way to give your product a rich sheen

Good Opacity

Gives high opacity

Long Lasting

Superior quality primer leads to Long lasting paint film.

Durable Finish

The improved formulation helps provide a uniform film on the surface due to better spreading and coverage.

Available Pack Sizes: 20ltr

Shelf Life: 2 YearsFROM THE DATE OF MANUFACTURING

Colors Available: 1000+ SHADES

Finish: Glossy, Smooth

Coverage: 130-135 SQ.FT/LITRE

Flash point :30 degree (By Able closed)

Refer Catalogue for more Information

APPLICATIONS: [Surface Preparation] New Surface to be cured 28 days before painting and free from all waterproofing issues Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking paint, laitance, algae, fungi etc. and wipe it clean

[Primer] Apply coat of Shalimar Primer depending upon the type of Primer and allow it to dry for 6-8 hrs. Mansonary Surface: Wall neutralizing cement/Universal white primer Ferrous Metal surface: Shalimar red oxide metal primer

[Putty] Level the surface with Shalimar Magic Acrylic Wall Putty or Shalimar Shakti wall guard putty and allow it to dry for 4-6 hrs Sand Surface with 180/320 emery paper and wipe it clean Apply an additional coat depending upon the surface conditions and smoothen the surface

[Primer] Apply second coat of primer and allow ti to dry for 6-8 hours Sand the surface and wipe it clean.

[Top Coat] Thin Superlac Hi gloss enamel with shalimar turpsol thinner, 10% to 15% by volume for brush application & 15% to 20% by volume of spray Apply 2-3 coats of Superlac Hi gloss enamel with an interval of 12 hrs (depending upon climate conditions) Application can be done by brush, roller or spray.

[Application Surfaces] All kind of well-prepared Metal surfaces, Wooden surfaces and masonry surfaces