Confident Revolving Stool CRS-111

Revolving Stool CRS-111

Highlights:

Stainless Steel Top:

Revolving Stool is provided with round and pressed stainless steel top 300mm dia The SS top is welded on MS sheet & frame which is to be further welded on the height adjustment screw.

Up and Down Movement:

The up & down movement can be achieved by rotating with hand anticlockwise & clockwise respectively. The height can be adjusted from 14" to 20"

Height Adjustment:

The nut for height adjustment is fixed inside the heavy gauge pipe welded on four legs which are made from 25mm dia. MS round pipes. The pipes are bent to hold a 16mm dia round chrome plated ring for foot rest.

Minimize Distortion:

Minimize distortion and for the deep penetration of the weld.

Quality:

All the steel components pre-treated for de-greasing, de-rusting and phosphating. After proper pre-treatment, the steel components epoxy powder coated and oven Baked at temp. Above 200 deg. C to provide scratch resistance surface coating film thickness 45-50 microns.

Stainless Steel Top: 300 mm Dia

Height: 14″ to 20″