Dulux Weathershield Prime Coat

Dulux Weathershield Prime Coat is specially designed high-performance primer for external plaster surface to improve adhesion between the wall and topcoat material.

Proper application of this special acrylic-based formulation ensures non-chalking with strong adhesion properties, effectively preventing peeling and flaking of topcoat. Its special formula seals the pores and provides good Anti Alkali & Efflorescence resistance property. Its excellent opacity and whiteness imparts good finish to the topcoat.

Key information :

Coverage : 110 - 150 sqft./litre

Drying Time : 3-4 hours

Coats : 1

Product Features

Superior Adhesion

Superior Whiteness

Superior Coverage

Anti Alkali – Anti Efflorescence

Application Description

Step 1 : Surface Preparation

Freshly Plastered surfaces must be allowed to cure completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. For best results the moisture content of the wall should be less than 10%. Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required

Step 2 : Application process

Dilute 1litre of Dulux Weathershield Prime Coat Primer with Maximum 1 litre of water. Apply 1 coat of Dulux Weathershield Prime Coat Primer and allow a drying time of 4-6 hours before applying topcoat. If there is putty application, then it is recommended to apply the priming coat below and above the putty.

Step 3 : Drying Time

Touch dry for Dulux Weathershield Prime Coat Primer is up to 1 hour and recoat time is within 3-4 hours.

Health & Safety

Avoid release to the environment. May cause an allergic skin reaction. Collect spillage. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Refer Safety Data Sheet for more details.

Refer Catalogue For More Information